Wireless AP upgrade

Started by icecream-guy, March 04, 2024, 01:13:32 PM

Previous topic - Next topic

icecream-guy

I went and bought a ASUS RT-AX86U Pro to replace my NetGear WAC104, I have them both running together until I get my wife and daugther to move over to the new network, then I will take out the Cisco 2950-12 and ASA5525 Firewall, and the WAC104, I could also probably pull out my Cisco 3550 also, and go 100% wireless with the  RT-AX86U connected directly to the cable modem.
:professorcat:

My Moral Fibers have been cut.

deanwebb

Wait, so you don't want to use your neighbor's wireless? I'm confused...  :smug:
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.

Otanx

I don't even want to think of changing wireless at my house. Figuring out all the IOT items that need to be updated with the new SSID and password would be a pain. Last time I updated I configured the new to match the old, and crossed my fingers.

-Otanx

icecream-guy

Quote from: Otanx on March 04, 2024, 05:58:10 PMI don't even want to think of changing wireless at my house. Figuring out all the IOT items that need to be updated with the new SSID and password would be a pain. Last time I updated I configured the new to match the old, and crossed my fingers.

-Otanx


just a couple of cell phones here, a few laptops, and a printer.  I did forget my work laptop, as I didn't work yesterday.
:professorcat:

My Moral Fibers have been cut.

icecream-guy

forgot about the multifunction printer/scanner and the firestick....
:professorcat:

My Moral Fibers have been cut.