I am setting up monitoring through PRTG with our newly purchased Adtran switches. My issue I am having is that alot of the thing in the Adtran MIB documentation do not show up in the Adtran switches. Primarily there are traps missing. Do I have to upload the MIB to the Adtran? or do some switches just not support all the traps? The firmware is up to date and is actually newer than the documentation recommends.
Did the newer firmware discontinue support of the MIBs in question?
https://portal.adtran.com/web/page/portal/Adtran/wp_adtranmibs
link at bottom of page "Not finding a MIB you need? Request via email"
or probably this...
Step 1: Compile the AOS Product-Specific MIBs
Download the MIBs you wish to install on your NMS. Visit ADTRAN's website at www.adtran.com to retrieve AOS MIBs.
Quote from: ristau5741 on November 01, 2017, 08:38:03 AM
https://portal.adtran.com/web/page/portal/Adtran/wp_adtranmibs
link at bottom of page "Not finding a MIB you need? Request via email"
or probably this...
Step 1: Compile the AOS Product-Specific MIBs
Download the MIBs you wish to install on your NMS. Visit ADTRAN's website at www.adtran.com to retrieve AOS MIBs.
Well, there ya go...